اكتشف كيفية اختيار أفضل رافعة خلفية لشاحنتك من خلال دليلنا الشامل. استكشف الأنواع المختلفة من الرافعات الخلفية، مثل النماذج الكابولية والعمودية والقابلة للطي، وافهم المعلمات الحاسمة مثل سعة الحمولة ومركز الحمل وحجم اللوحة. تعرف على العوامل التي يجب مراعاتها لضمان التوافق الصحيح مع شاحنتك وتحسين كفاءة مناولة البضائع لديك.
كيفية اختيار الرافعة الخلفية للشاحنة؟
هناك العديد من العلامات التجارية والموديلات للرافعات الخلفية للشاحنات، والجودة والأسعار في السوق متفاوتة. بالنسبة للمستهلكين العاديين، من الصعب اختيار رافعة خلفية بجودة جيدة وسعر منخفض تناسب مؤسساتهم. بعد ذلك، ستتحدث شركة وول، المصنعة للرافعات الخلفية للشاحنات، عن كيفية اختيار الرافعة الخلفية للشاحنة.
First of all, we should know the model of the vehicle with رافعة خلفية, the size of the compartment and the type of رافعة خلفية. There are three types of رافعة خلفية: cantilever type, vertical type and folding type. After selecting the type, it depends on the parameters. Three important parameters of the رافعة خلفية are load, panel size and load center, as follows:
1. Load:
Choose the truck رافعة خلفية load parameters, which tend to be larger than the actual cargo weight. For example, if the cargo weight is 1.1 tons, choose 1.5 tons instead of 1.5 tons. Although it can be used, it will increase the pressure of the truck رافعة خلفية oil cylinder. The load of the رافعة خلفية is generally 1.2 times of the rated load. When your budget is limited and you will not exceed the rated load for a long time, you can choose a vehicle model that is equal to or less than the cargo weight. If the cargo is 1.3 tons, 1.5 tons can be selected. It is easier to be big than small.
2. Load center:
The rated load refers to the weight within the load center. When the center of gravity of the cargo is outside the load center, the load will drop, and the rated load cannot be raised. The load center of the automobile رافعة خلفية is 600mm from the root of the رافعة خلفية panel. Only at this point and center can the tonnage marked on the رافعة خلفية be loaded. Therefore, the cargo can be placed as close to the root of the panel as possible, without overloading.
3. Panel width selection:
It is good to match the outside width of the car, which is between 10mm and 10mm. The length of the رافعة خلفية is generally longer than the length of the goods or pallet, and cannot be shorter than the length of the goods or pallet by 100mm, otherwise it will slide off the storage space. Now the رافعة خلفية manufacturer generally configures 1.8 meters as standard, and can make it to order if necessary.
Secondly, the quality and price of the market رافعة خلفية are uneven. Guangzhou woll suggested that the brand should be determined first, then the type and parameters should be selected, and then the price should be appropriate. Of course, after-sales service is also important reference information.
Woll has developed various warehousing and logistics handling equipment, including automobile رافعة خلفية, carriers, lifting trucks, pallet adjustment plates, oil bucket trucks, boarding bridges, lifting elevators, storage lifting platforms, etc. The products are strictly controlled at all levels from design, production, assembly and testing to installation and sales. As for the رافعة خلفية of which structure to choose, truck drivers can choose according to their own vehicle conditions and the advantages and disadvantages of various structures.
