Как выбрать задний подъемник для грузовика

Узнайте, как выбрать лучший задний подъемник для грузовика для вашего автомобиля с помощью нашего подробного руководства. Изучите различные типы задних подъемников, такие как консольные, вертикальные и складные модели, и разберитесь в ключевых параметрах, таких как грузоподъемность, центр нагрузки и размер платформы. Узнайте, какие факторы следует учитывать, чтобы обеспечить правильный подбор для вашего грузовика и оптимизировать эффективность обработки грузов.

Как выбрать задний подъемник для грузовика?

Существует множество брендов и моделей задних подъемников для грузовиков, и качество и цена на рынке смешаны. Для обычных потребителей трудно выбрать задний подъемник с хорошим качеством и низкой ценой, подходящий для их собственных предприятий. Далее Woll, производитель задних подъемников для грузовиков, расскажет о том, как выбрать задний подъемник для грузовика.

Прежде всего, нам нужно знать модель автомобиля с гидробортом, размер отсека и тип гидроборта. Существует три типа гидроборта: консольный, вертикальный и складной. После выбора типа всё зависит от параметров. Три важных параметра гидроборта — это грузоподъёмность, размер платформы и центр нагрузки, как указано ниже:

1. Грузоподъёмность:

Choose the truck tail lift load parameters, which tend to be larger than the actual cargo weight. For example, if the cargo weight is 1.1 tons, choose 1.5 tons instead of 1.5 tons. Although it can be used, it will increase the pressure of the truck tail lift oil cylinder. The load of the tail lift is generally 1.2 times of the rated load. When your budget is limited and you will not exceed the rated load for a long time, you can choose a vehicle model that is equal to or less than the cargo weight. If the cargo is 1.3 tons, 1.5 tons can be selected. It is easier to be big than small.

2. Load center:

The rated load refers to the weight within the load center. When the center of gravity of the cargo is outside the load center, the load will drop, and the rated load cannot be raised. The load center of the automobile tail lift is 600mm from the root of the tail lift panel. Only at this point and center can the tonnage marked on the tail lift be loaded. Therefore, the cargo can be placed as close to the root of the panel as possible, without overloading.

3. Panel width selection:

It is good to match the outside width of the car, which is between 10mm and 10mm. The length of the tail lift is generally longer than the length of the goods or pallet, and cannot be shorter than the length of the goods or pallet by 100mm, otherwise it will slide off the storage space. Now the tail lift manufacturer generally configures 1.8 meters as standard, and can make it to order if necessary.

Secondly, the quality and price of the market tail lift are uneven. Guangzhou woll suggested that the brand should be determined first, then the type and parameters should be selected, and then the price should be appropriate. Of course, after-sales service is also important reference information.

Woll has developed various warehousing and logistics handling equipment, including automobile tail lift, carriers, lifting trucks, pallet adjustment plates, oil bucket trucks, boarding bridges, lifting elevators, storage lifting platforms, etc. The products are strictly controlled at all levels from design, production, assembly and testing to installation and sales. As for the tail lift of which structure to choose, truck drivers can choose according to their own vehicle conditions and the advantages and disadvantages of various structures.

Share the Post:
Scroll to Top